To create an MC AOS VFLink Group

Steps
 

Choose Manage→Redundancy→Node Redundancy from the NFM-P main menu. The Manage Node Redundancy form opens.


Choose MC AOS Group (Aos Redundancy) and click Search.


Choose an MC AOS group and click Properties. The MC AOS Group (Edit) form opens.


Click on the Associated Groups tab.


Right-click on MC AOS VFLink Group and choose Create MC AOS VFLink Group. The AOS VFLink Group (Create) form opens.


Select a Default Vlan for VFLink and click OK.


Click Apply.


Click Properties in the First MultiChassis VFLinkEnd (Chassis Id 1) panel. The AOS VF Link End form opens.


Click on the VF Link End Member Port tab and click Create. The Select Port - AOS VF Link End form opens.

Note: Up to eight member ports can be added for each OmniSwitch; the ports must be access ports with a speed of 10Gb or higher.


10 

Select one or more ports and click OK. The Select Port - AOS VF Link End form closes.


11 

Click Properties in the Second MultiChassis VFLinkEnd (Chassis Id 2) panel. The AOS VF Link End form opens.


12 

Click on the VF Link End Member Port tab and click Create. The Select Port - AOS VF Link End form opens.

Note: Up to eight member ports can be added for each OmniSwitch; the ports must be access ports with a speed of 10Gb or higher.


13 

Choose one or more ports and click OK. The Select Port - AOS VF Link End form closes.

Note: This member port cannot be used as a learned port security, VLAN access interface, or LAG member. Attempting to use the member port in such a way causes a deployment failure.


14 

Save your changes and close the forms.

End of steps