To configure L3 forwarding from a VPLS or MVPLS to an IES or VPRN service

Purpose

Perform this procedure to configure MC ring group traffic forwarding through a BSA spoke SDP to a BSR L3 access interface in an IES or VPRN service, as shown in Figure 45-1, Simple subscriber aggregation network .

Steps
 

Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.


Click Search. A list of services is displayed.


Select a VPLS or MVPLS and click Properties. The service properties form opens.


Click on a site in the service navigation tree. The site properties form opens.


Click on the Default Gateway tab.


Configure the parameters, which specify the IP and MAC addresses of the default gateway to which the VPLS is to forward L3 traffic.


Click OK to save your changes and close the site properties form.


Click OK to save your changes and close the service properties form.

End of steps