To configure an MC ring group for redundant VLL Epipe access
Purpose
Perform this procedure to configure traffic forwarding from a BSA SAP in an MC ring group through a VLL Epipe to a BSA SAP outside the ring group, as shown in Figure 45-5, Dual-homed VLL Epipe configuration .
Steps
1 |
Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens. |
2 |
Click Search. A list of services is displayed. |
3 |
Select the appropriate VLL Epipe service and click Properties. The Epipe Service (Edit) form opens. |
4 |
Right-click on an L2 access interface in the service navigation tree and click Properties. The L2 Access Interface (Edit) form opens. |
5 |
Configure the MC Ring Node parameter by clicking Select or by typing the name of a ring node that terminates on the port associated with the L2 access interface. |
6 |
Click OK to save your changes and close the L2 Access Interface (Edit) form. |
7 |
Click OK to save your changes and close the Epipe Service (Edit) form. End of steps |