To configure MPLS-TP on a routing instance
Purpose
Use the following procedure to configure MPLS-TP on a routing instance. Ensure that you enable MPLS-TP on all NEs that are participating in the MPLS-TP network, as described in To enable MPLS-TP on a routing instance .
Steps
1 |
In the navigation tree Routing view, expand Network→NE→Routing Instance→MPLS-TP. |
2 |
Right-click on a MPLS-TP icon and choose Properties. The MPLS-TP, Routing Instance (Edit) form opens. |
3 |
Configure the required parameters The Global ID and Node ID parameters are identifiers of an MPLS-TP site on the NE. The TP-LSP ID Minimum and TP-LSP ID Maximum parameters reserve a range of IDs that you use for MPLS-TP LSPs. |
4 |
Configure the Administrative State parameter in the States panel. |
Configure a proactive OAM template | |
5 |
Right-click on a MPLS-TP icon and choose Properties. The MPLS-TP, Routing Instance (Edit) form opens. Perform the following steps:
|
Configure a protection template | |
6 |
Click on the Protection Template tab and click Create.The Protection Template, Routing Instance (Create) form opens. Perform the following steps: |
7 |
Save your changes and close the form. End of steps |