To start or stop a NAT address-pool drain operation
Steps
1 |
In the navigation tree Routing view, expand Network→NE→Routing Instance. |
2 |
Right-click on the routing instance icon that has one or more configured NAT pools and choose Properties. The Routing Instance (Edit) form opens. |
3 |
Click on the NAT Configuration tab. |
4 |
Click Search, select a NAT configuration in the list and click Properties.The NAT Configuration (Edit) form opens. |
5 |
Click on the NAT Pools tab. |
6 |
Click Search, select the required address pool and click Properties.The NAT Pool (Edit) form opens. Note: You can also select multiple address pools and use the Drain or Stop Drain buttons to control the draining for the selected address pools, as described in subsequent procedure steps. |
7 |
Click Drain to start a drain operation on the address pool. The number of host sessions that are associated with the address range decreases as sessions close. |
8 |
Click Stop Drain to stop an active drain operation on the address pool. New host sessions can use the address range. |
9 |
Close the forms. End of steps |