To configure a NAT deterministic script on a remote server
Steps
1 |
In the navigation tree Equipment view, right-click on an NE and choose Properties. The Network Element (Edit) form opens. |
2 |
Click on the Globals tab. |
3 |
Click on the Subscriber Management tab. |
4 |
Configure the Remote URL parameter using the following syntax: [{ftp://|tftp://}<login>:<password>@<remote_address>/] [<path_file>] where... <login> is the login name of the remote server. <password> is the login password of the remote server. <remote_address> is the IP address of the remote server. <path_filename> is the path to the folder on the remote server where the mappings are stored. |
5 |
Click Apply and then click Save Script to save the current deterministic NAT mappings to a file on the specified remote server. |
6 |
If required, click Resync to update the read-only information in the Save Needed, Last Saved Result, and Last Saved Time fields. If a change occurs on the local NE that affects the deterministic NAT mappings, the Save Needed parameter changes to Yes, indicating that you must click Save Script to update the mappings. |
7 |
Save your changes and close the form. End of steps |