Workflow to configure IS-IS
Stages
1 |
Enable IS-IS on a routing instance; see To enable IS-IS on a routing instance . |
2 |
Configure global-level IS-IS on a routing instance; see To configure IS-IS on a routing instance . |
3 |
Configure IS-IS segment routing as required; see To configure IS-IS segment routing . |
4 |
Configure an IS-IS link group on a routing instance as required; see To configure an IS-IS link group on a routing instance . |
5 |
Configure at least one IS-IS NET address; see To configure an IS-IS NET address . |
6 |
Configure at least one IS-IS interface; see To configure an IS-IS interface . |
7 |
If LDP over RSVP is enabled for IS-IS, configure an operational LSP between routers; see Chapter 31, MPLS . |