To configure an RSVP interface
Steps
1 |
In the navigation tree Routing view, expand Network→NE→Routing Instance→RSVP→Interfaces→Interface. |
2 |
Right-click on the Interface icon and choose Properties. The RSVP Interface (Edit) form opens. |
3 |
Configure the required parameters. |
4 |
Click on the Protocol Properties tab and configure the required parameters. The Class Type BW Percent parameters can only be configured if the Inherit NFM-P Class Type BW parameter is disabled. If you enter values at the RSVP interface level, they override the global values configured in To configure RSVP on a routing instance for the RSVP routing instance on the NE. |
5 |
Click on the Authentication tab and configure the Key parameter. |
6 |
Select an RSVP Keychain. |
7 |
Click on the TE Thresholds tab and configure the required parameters. You can only configure the Up Threshold (%) and Down Threshold (%) parameters if the Inherit TE Up Thresholds and Inherit TE Down Thresholds parameters are disabled, respectively. |
8 |
Save your changes and close the form. End of steps |