| |
|
1 |
In the navigation tree Routing view, expand Network→NE→Routing Instance→MSDP.
|
2 |
Right-click on the MSDP icon and choose Create Group. The MSDP Peer Group (Create) form opens.
|
3 |
Configure the required parameters.
|
4 |
Click on the Peer tab to add a peer.
|
5 |
Click Create. The MSDP Peer Group (Create) form opens.
|
6 |
Configure the required parameters.
|
7 |
Configure the import and export policies for the MSDP peer. Perform the following steps:
-
Click on the Import Policies tab.
-
Configure the required parameters.
Configure the import route policy to determine which routes are accepted from peers. The policies should match the policies you set when configuring the Routing Policy Manager, as described in
Chapter 27, NE routing and forwarding . There is no validation performed by the router to ensure the policies match.
-
Click on the Export Policies tab.
-
Configure the required parameters.
Configure the export route policy to determine which routes are advertised to peers. The policies should match the policies you set when configuring the Routing Policy Manager, as described in
Chapter 27, NE routing and forwarding . There is no validation performed by the router to ensure the policies match.
|
8 |
Click on the Authentication tab.
|
9 |
Configure the required parameters.
|
10 |
Save your changes and close the form.
|
11 |
Configure the import and export policies for the MSDP group. Perform the following steps:
-
Click on the Import Policies tab.
-
Configure the required parameters.
Configure the import route policy to determine which routes are accepted from peers. The policies should match the policies you set when configuring the Routing Policy Manager, as described in
Chapter 27, NE routing and forwarding . There is no validation performed by the router to ensure the policies match.
-
Click on the Export Policies tab.
-
Configure the required parameters.
Configure the export route policy to determine which routes are advertised to peers. The policies should match the policies you set when configuring the Routing Policy Manager, as described in
Chapter 27, NE routing and forwarding . There is no validation performed by the router to ensure the policies match.
|
12 |
Save your changes and close the form.
End of steps |