To configure an epipe SAP template policy

Steps
 

Choose Manage→Service→SAP Template Policies from the NFM-P main menu. The Manage Service SAP Template Policies form opens.


Click Create→Epipe SAP Template or select an existing epipe SAP template policy and click Properties. The Epipe SAP Template (Create|Edit) form opens.


On the General tab, configure the Displayed Name parameter.

An epipe SAP template policy cannot share the same object name as a VPLS SAP template policy if both policies are distributed to the same NE. Although both policies could co-exist in the NFM-P database, the NE stores both policy types in the same MIB table, which would cause a conflict.


Click on the Egress tab and select the following objects for the epipe SAP template policy:

  • IP filter

  • IPv6 filter

  • MAC filter

  • QoS policy


Click on the Ingress tab.

  1. Select the following objects for the epipe SAP template policy:
    • IP filter

    • IPv6 filter

    • MAC filter

    • QoS policy

  2. Configure the Shared Queue parameters, if required.


Click OK to save the policy and close the form, or click Apply to save the policy. See To release and distribute a policy to distribute the policy to NEs.

End of steps