To reevaluate a PW template policy on a local definition after a configuration change
Purpose
Perform the following procedure to cause the NEs to re-configure SDPs to match the configuration in the template when a PW template policy is modified. This causes a re-evaluation of the selected template for all VPLS services on the selected NE.
You can also reevaluate a PW template policy at the service and service site levels.
Steps
1 |
Choose Manage→Service→Service PW Template Policies from the NFM-P main menu. The Manage Service PW Template Policies form opens. |
2 |
Choose a PW template policy and click Properties. The Service PW Template Policy (Edit) form opens. |
3 |
Click on the Local Definitions tab. |
4 |
Choose the NE on which you need to re-evaluate the PW template policy. The Service PW Template - Local Policy (Edit) form opens. |
5 |
Click Re-evaluate PW Template to run an evaluation of the modified template. The NFM-P performs a re-evaluation of the selected template for all VPLS services on the selected NE. |
6 |
A dialog box appears indicating if the re-evaluation was successful. If it was not, the reason for the failure is displayed. If you make any subsequent modifications, you can re-evaluate the template again. Click OK. |
7 |
Save the changes and close the forms. End of steps |