To configure an AA Cflowd group policy

Steps
 
1 

Choose Policies→ISA Policies→Application Assurance from the NFM-P main menu. The Application Assurance Policies form opens.

2 

Click Create→AA Cflowd Group Policy, or select an AA Cflowd group policy and click Properties. The AA Cflowd Policy (Create | Edit) form opens.

3 

Configure the parameters.

When you configure the ISA-AA Partition ID parameter, the Partitions parameter is automatically set to Enabled.

4 

Click Apply.

5 

If the Partitions parameter is set to Enabled and you specified an ISA-AA Partition ID value, go to Step 14 .

6 

Click on the Cflowd tab and configure the parameters.

7 

Specify the Cflowd collectors.

  1. Click on the Collector tab.

  2. Click Create or select an existing collector entry and click Properties. The Cflowd Collector (Create | Edit) form opens.

  3. Configure the parameters.

  4. Save your changes and close the form.

    An ISA-AA group can contain a maximum of sixteen Cflowd collectors.

8 

If the Partitions parameter on the General tab is set to Disabled, go to Step 9 .

9 

To add an AA application or application group for Cflowd performance monitoring, click on the Performance tab. Otherwise, go to Step 12 .

10 

To add an AA application for Cflowd performance monitoring, perform the following steps.

  1. Click Add Applications RTP, Add Applications Comprehensive, or Add Applications TCP. The Select Applications form opens.

  2. Select one or more applications and click OK.

11 

To add an AA application group for Cflowd performance monitoring, perform the following steps.

  1. Click Add Application Groups RTP, Add Application Groups Comprehensive, or Add Application Groups TCP. The Select Application Groups form opens.

  2. Select one or more application groups and click OK.

12 

To set the Cflowd sampling administrative states, click on the State tab and configure the required parameters.

13 

To configure a template:

  1. Click on the Template tab.

  2. Select a template and click Properties.

  3. In the form that opens, configure the General parameters.

  4. Click on the Dynamic Fields tab and click Create.

  5. In the Create form, click Select to choose a dynamic field and click OK to add it to the template.

  6. Add additional fields as needed and click OK.

14 

Save your changes and close the forms.

End of steps