To configure the maximum number of tasks for distribution
Purpose
The NFM-P allows you to select multiple policies of the same type for bulk distribution. Perform this procedure to change the default maximum number of tasks involved when a group of policies is distributed.
|
CAUTION
Service Disruption |
Contact your Nokia technical support representative before you attempt to modify the nms-server.xml file.
Modifying the nms-server.xml file can have serious consequences that can include service disruption.
Steps
|
|
1 |
Log in to the NFM-P main server station as the nsp user.
|
2 |
Navigate to the /opt/nsp/nfmp/server/nms/config directory.
|
3 |
Create a backup copy of the nms-server.xml file.
|
4 |
Open the nms-server.xml file using a plain-text editor.
|
5 |
Search for the following XML tag:
<policyConfig maxTasksForBulkDistribute="200000"/>
|
6 |
Change the number, as required. The default is 200,000. Nokia recommends that you configure the value between 1 and 200,000.
|
7 |
Save and close the nms-server.xml file.
|
8 |
Open a console window.
|
9 |
Navigate to the /opt/nsp/nfmp/server/nms/bin directory.
|
10 |
If the main server is a standalone server, or the primary server in a redundant deployment, enter the following:
bash$ ./nmsserver.bash read_config ↵
The main server reads the nms-server.xml file and puts the configuration change into effect.
|
11 |
If the main server is the standby server in a redundant deployment, enter the following:
bash$ ./nmsserver.bash force_restart ↵
The main server restarts and puts the configuration change into effect.
|
12 |
Close the console window.
End of steps |