To configure an L2TP RADIUS accounting policy
Purpose
Perform the following procedure to create an L2TP RADIUS accounting policy to collect usage data based on either an L2TP tunnel or an L2TP session and send this data to a RADIUS server. See To configure L2TP on a routing instance for information on configuring an L2TP RADIUS accounting policy on a routing instance.
Steps
1 |
Choose Policies→AAA Policies→L2TP RADIUS Accounting from the NFM-P main menu. The L2TP RADIUS Accounting Policies form opens. |
2 |
Click Create or select an existing L2TP RADIUS accounting policy and click Properties. The L2TP RADIUS Accounting Policy (Create|Edit) form opens. |
3 |
Select a RADIUS Script policy. |
4 |
Select a RADIUS server policy. |
5 |
Configure the required parameters. The Definition and Value parameters are only configurable when the NAS Port Type option is enabled. The Bit Specification parameter is only configurable when the NAS Port option is enabled. The Prefix Type, Prefix, and Suffix Type parameters are only configurable when the NAS Port ID option is enabled. |
6 |
Click on the RADIUS Servers tab. |
7 |
Configure the required parameters. The Source Address parameter only appears when you are editing an existing local version of an L2TP RADIUS accounting policy. |
8 |
Configure the Router Instance parameter. If you set the Router Instance parameter to VPRN, perform Step 9. Otherwise, go to Step 10. The Router Instance parameter is configurable on the 7450 ESS and 7750 SR. |
9 |
To configure a VPRN service as a virtual router instance for the L2TP RADIUS-based accounting policy, select a VPRN service in the VPRN ID panel. |
10 |
Click Create or select an existing L2TP RADIUS server and click Properties. The L2TP RADIUS Server (Create|Edit) form opens. |
11 |
Configure the required parameters. |
12 |
Save your changes and close the forms. See To release and distribute a policy to distribute the policy to NEs. End of steps |