To initiate an accounting on/off message from a RADIUS server policy

Purpose

Perform the following procedure to manually send an Accounting On or Accounting Off message from a RADIUS server policy. The command is enabled only on a RADIUS sever policy that is configured as the controller in an accounting on/off group. In order to perform this procedure, the RADIUS server policy must be distributed to an NE (see Chapter 49, Policies overview).

Steps
 

Choose Policies→AAA Policies→RADIUS Server Policies from the NFM-P main menu. The Manage Radius Server Policies form opens.


Select a RADIUS server policy and click on the Properties button. The RADIUS Server Policy (Edit) form opens.


Click on the Send Accounting On/Off Message button and confirm the action.


In the Accounting On/Off Operation form, configure the Action parameter.


Click OK to send the Accounting On or Accounting Off message.


Close the forms.

End of steps