To configure a VLAN range for a 7210 SAS VPLS or VLL Epipe service

Purpose

Perform this procedure to create a connection profile to configure a range of VLAN values that you can assign to an Dot1q SAP in a VPLS or VLL Epipe service.

Note: You cannot modify an existing connection profile that is associated with a SAP. If you need to modify the connection profile, you must first remove the profile from all SAPs with which it is associated.

Steps
 

Choose Policies→ATM→Connection Profile from the NFM-P main menu. The Manage Connection Profile form opens.


Click Create. The Connection Profile (Create) form opens with the General tab displayed.


Configure the required parameters.


Specify the list of VLAN ranges or individual VLAN IDs to be used for mapping the VLANs to the VPLS or VLL Epipe SAP.

  1. Click on the VLAN Ranges tab.

  2. Click Create. The VLAN Range form opens.

  3. Configure the Range parameter and click OK. The VLAN Range form closes.

  4. Repeat 2 and 3 to create additional ranges.


Click OK to save the policy and close the form, or click Apply to save the policy. See To release and distribute a policy to release and distribute the policy to NEs.


Close the forms.

End of steps