To configure a Python policy

Steps
 

Choose Policies→Python→Python Policy from the NFM-P main menu. The Python Policies form opens.


CAUTION 

CAUTION

Service Disruption

Modifying an active Python script is potentially service-affecting.

Ensure that you consider the implications of reconfiguring the Python policy before you proceed.

Click Create or select an existing entry and click Properties. The Python Policy form opens.


Configure the required parameters.

The ISA -WLAN GW group and ISA-NAT group parameters can only be configured at the time of policy creation. You can configure an ISA -WLAN GW group OR an ISA-NAT group on the policy, but not both. If the policy is configured with an ISA -WLAN GW group or an ISA-NAT group, you cannot configure a Python cache or message entries. Save your changes and close the form.


Click on the Cache tab to configure a Python cache.

  1. Click Create or select the existing entry and click Properties. The Python Policy Cache form opens.

  2. Configure the required parameters.

  3. Save your changes and close the form.


Click on the Message Entries tab to configure message entries.

  1. Click Create or select an existing entry and click Properties. The Python Policy Message form opens.

  2. Configure the required parameters.

  3. Select a Python script policy.


Click OK to confirm and close the forms, or click Apply to save the policy. See To release and distribute a policy to distribute the policy to NEs.

End of steps