To configure a PBB MRP policy
Steps
1 |
Choose Policies→Ethernet→PBB MRP from the NFM-P main menu. The PBB MRP Policies form opens. |
2 |
Click Create. The PBB MRP Policy (Create) form opens with the General tab displayed. |
3 |
Configure the required parameters. |
4 |
Click the Entries tab. |
5 |
Click Create. The PBB MRP Policy Entry (Create) form opens with the General tab displayed. |
6 |
Configure the required parameters. |
7 |
Click the ISID Match Criteria tab. |
8 |
Click Create to specify ISID matching criteria for an entry. Multiple ISID matching criteria can be specified for each entry. The ISID Match Criteria (Create) form opens. |
9 |
Configure the required parameters and click OK. |
10 |
Repeat Step 8 and Step 9 to add another set of criteria. Otherwise, go to Step 11 . |
11 |
Click OK. The PBB MRP Policy Entry (Create) form closes. |
12 |
Repeat Step 5 to Step 11 to add another entry. Otherwise, go to Step 13 . |
13 |
Click OK to save the policy and close the form, or click Apply to save the policy. See To release and distribute a policy to release and distribute the policy to NEs. |
14 |
Close the form. End of steps |