To configure a QoS prefix list policy

Purpose

QoS IPv4 and IPv6 prefix lists are associated with the following QoS policies:

Various tabs on the QoS IP Prefix List form show the associations for lists in distributed policies.

Steps
 

Choose Policies→QoS→SROS QoS→QoS Match→ Prefix List from the NFM-P main menu. The QoS – Prefix Lists form opens.


Click Create, or choose a policy in the list and click Properties. The QoS – IP Prefix List (Create|Edit) form opens.


If you are creating a new policy, configure the IP Prefix List Name and IP Prefix List Type parameters, and click Apply.


Configure IP Prefix List members.

  1. Click on the IP Prefix List Members tab.

  2. Click Create, or choose an entry and click Properties. The QoS IP Prefix List Member form opens.

  3. Configure the Prefix and Mask parameters.

  4. Save your changes and close the form.


Click OK to save the policy and close the form, or click Apply to save the policy. See To release and distribute a policy to distribute the policy to NEs.

End of steps