To configure an OmniSwitch QoS policy action
Note: OmniSwitch QoS policies consist of a condition and an action. You must configure at least one condition and one action before you can create a policy.
Steps
1 |
Choose Policies→QoS→AOS QoS Policies from the NFM-P main menu. The AOS QoS Policies form opens. |
2 |
Click Create→QoS Action or choose an AOS QoS action and click Properties. The AOS QoS Action - Global Policy (Create | Edit) form opens. |
3 |
Configure the required parameters. Note: You cannot use DSCP and ToS parameters in the same action. You cannot use Maximum Bandwidth (Kbps) and Information Rate and Burst Size parameters in the same action. |
4 |
Save your changes and close the form. End of steps |