To configure a 7705 SAR fabric profile

Steps
 

Choose Policies→QoS→SROS QoS→Fabric from the NFM-P main menu. The Fabric Profiles form opens.


Click Create or choose an existing fabric policy and click Properties. The Fabric (Create | Edit) form opens.


Configure the required parameters.


Click on the Rates tab. Perform one of the following:

  1. If you chose Aggregate Mode in Step 3 , configure the parameters:

    • Aggregate Rate (kbps)

    • Unshaped SAP CIR (kbps)

  2. If you chose Destination Mode in Step 3 , configure the Rate To MDA in kbps for each daughter card slot to set the fabric shaping rate to each daughter card.

    You can also configure the MultiPoint Rate (kbps) parameter for distribution to all of the daughter cards.


Click Apply. The form refreshes to enable the other tabs.


Click Distribute to distribute the policy to NEs. See To release and distribute a policy for more information.


Click OK to save the policy and close the form.

End of steps