To configure a 7705 SAR shaper policy
Purpose
All 7705 SAR devices have a default shaper QoS policy and an associated shaper group that cannot be modified. If you create a new shaper QoS policy, you can modify the associated default shaper group.
Steps
1 |
Choose Policies→QoS→SROS QoS→Shaper from the NFM-P main menu. The Shaper Policies form opens. |
2 |
Click Create or choose an existing Shaper policy and click Properties. The Shaper Policy (Create | Edit) form opens. |
3 |
Configure the required parameters. |
4 |
Click OK and confirm. |
5 |
Click Distribute to distribute the policy to NEs. See To release and distribute a policy for more information. |
6 |
Select the newly-created policy in the Shaper Policies form and click Distribute to distribute the policy to NEs. See To release and distribute a policy for more information. |
7 |
To modify a default shaper group, choose a newly-created policy from the Shaper Policies form and click Properties. The Shaper Policy, Global Policy (Edit) form opens. |
8 |
Click on the Shaper Group tab. |
9 |
Choose the default Shaper group and click Properties. The Shaper Group (Edit) form opens. |
10 |
Configure the Description parameter and the MIN and MAX values for the PIR (kbps) and CIR (kbps) using the sliders. The sliders are operational when the checkboxes are disabled. |
11 |
Click OK to save your changes and close the forms. End of steps |