To configure QoS policy overrides on access ingress queues for a 7210 SAS-X

Purpose

Perform this procedure to override the queue settings of an access ingress policy for an L2 or L3 access interface on a 7210 SAS-X.

You cannot override the settings for QoS policies whose scope is set to exclusive.

Policy overrides on L2 access interfaces are not supported for the following:

  • Uplink SAPs

  • SAPs on mirror services

  • SAPs with time of day suites attached

Steps
 

Open the properties form for the L2 or L3 access interface for which you need to configure an override.

  1. Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.

  2. Choose Site (Service Management) from the object drop-down menu and click Search.

  3. Choose a 7210 SAS-X site from the list and click Properties. The properties form for the site opens.

  4. Expand the site equipment tree as required, and click on an L2 | L3 access interface. The properties form for the access interface opens.


Click on the Override Policy Items tab, then on the Access Ingress Queues sub-tab.


Click Create. The Access Ingress Queue Override (Create) form opens.


Click Select in the Ingress QoS Policy Queue panel and choose a queue, then click OK.

Note: You can only configure an override on a queue that is mapped to a forwarding class.


Click on the Override tab and configure the required parameters.

To override any of the parameters, you must first select the associated check box. Deselect the associated Default or MAX check box to enter a specific value, or to select a drop-down menu option.


To override the queue management policy:

  1. Select the check box for Displayed Name.

  2. Click Clear, then click Select.

  3. Choose a queue management policy from the list and click OK.

    Note:

    The selected queue management policy must be distributed to the NE that contains the SAP for which you are performing the policy override. Click on the Properties button to view the properties form for the queue management policy. You can use this properties form to distribute the policy to the NE, if required. See Policy distribution in Chapter 49, Policies overview .


Click on the OK button. The Access Ingress Queue Override (Create) form closes.


Click OK to save your changes and close the form.

End of steps