|
|
1 |
Choose Policies→Residential Subscriber from the NFM-P main menu. The Residential Subscriber Policies form opens.
|
2 |
|
CAUTION
Service Disruption |
Modifying an active subscriber identification policy is potentially service-affecting.
Ensure that you consider the implications of reconfiguring the subscriber identification policy before you proceed.
Click Create→Subscriber Identification Policy or choose an existing subscriber identification policy and click Properties. The Subscriber Identification Policy (Create|Edit) form opens.
|
3 |
Configure the required parameters.
You can designate a subscriber identification policy as the default policy by specifying the case-sensitive name “default” for the Displayed Name parameter. The Displayed Name parameter is configurable only during subscriber identification policy creation.
|
4 |
Click on the Supported Service Models tab and specify the intended service model(s) for the subscriber identification policy.
|
5 |
Click on the SLA Profiles tab to configure SLA profiles for the subscriber identification policy.
-
On the General tab, configure the Use Direct Map as Default parameter.
-
Click on the Profiles tab.
-
Click Create or choose an SLA profile entry and click Properties. The SLA Profile Entry (Create|Edit) form opens.
-
Configure the SLA Profile String parameter.
-
Select an SLA profile to associate with the subscriber identification policy.
-
Save your changes and close the form.
|
6 |
Click on the Subscriber Profiles tab to configure subscriber profiles for the subscriber identification policy.
-
On the General tab, configure the Use Direct Map as Default parameter.
-
Click on the Profiles tab.
-
Click Create or choose a subscriber profile entry and click Properties. The Subscriber Profile Entry (Create|Edit) form opens.
-
Configure the Subscriber Profile String parameter.
-
Select a subscriber profile to associate with the subscriber identification policy.
-
Save your changes and close the form.
|
7 |
Click on the Application Profiles tab to configure application profiles for the subscriber identification policy.
-
On the General tab, configure the Use Direct Map as Default parameter.
-
Click on the Profiles tab.
-
Click Create or choose an application profile entry and click Properties. The App Profile Entry (Create|Edit) form opens.
-
Configure the required parameters.
-
Select an application profile to associate with the subscriber identification policy.
Note:
If the subscriber identification policy is a global policy, global AA group policies are listed. If the subscriber identification policy is a local policy, local AA group policies are listed.
Global AA group policies must be manually distributed to the NE before a global subscriber identification policy using the application profiles can be distributed.
When a new subscriber identification or subscriber explicit map is discovered from the NE, the AA group policy is not automatically resynchronized to the global subscriber identification policy.
-
Save your changes and close the form.
|
8 |
Click OK to save the policy and close the form, or click Apply to save the policy. See
To release and distribute a policy to distribute the policy to NEs
End of steps |