To configure a distributed subscriber management traffic policer
Steps
1 |
Choose Policies→Residential Subscriber from the NFM-P main menu. The Residential Subscriber Policies form opens. |
2 |
Click Create→Distributed Subscriber Management Traffic Policer or select an existing policer item and click Properties. The Distributed Subscriber Management Traffic Policer (Create|Edit) form opens. Modifying an active distributed subscriber management traffic policer is potentially service-affecting. Ensure that you consider the implications of reconfiguring the policer before you proceed. |
3 |
Configure the required parameters. The Action parameter is configurable only if the Type parameter is set to Single Bucket Bandwidth. The CBS parameter is configurable only if the Type parameter is set to Dual Bucket Bandwidth. |
4 |
On the Rates and Adaptation Rules panels, configure the required parameters. The CIR parameter is configurable only if the Type parameter is set to Dual Bucket Bandwidth. |
5 |
Click OK to save the policer and close the form, or click Apply to save the policer. See To release and distribute a policy to distribute the policer to NEs. End of steps |