To configure a BGP Peering policy

Note: Most of the parameters in a BGP peering policy can be configured directly on the policy object, or the parameter value can be inherited from the parent BGP object by enabling the Inherit Value check box next to each parameter.

Steps


1	Choose Policies→Residential Subscriber from the NFM-P main menu. The Residential Subscriber Policies form opens.
2	Click Create→BGP Peering Policy or choose an existing BGP peering policy and click Properties. The BGP Peering Policy (Create\|Edit) form opens.
3	Configure the required parameters.
4	Click on the Behavior tab and configure the required parameters.
5	Click on the AS Properties tab and configure the required parameters.
6	Click on the Import Policies tab and select import routing policy statements for the BGP peering policy.
7	Click on the Export Policies tab and select export routing policy statements for the BGP peering policy.
8	Click on the Authentication tab and configure the MD5 Authentication and Authentication Key parameters.
9	Click OK to save the policy and close the form, or click Apply to save the policy. See To release and distribute a policy to distribute the policy to NEs. End of steps