Choose Policies→Residential Subscriber from the NFM-P main menu. The Residential Subscriber Policies form opens.

Click Create→Mobile Gateway/Peer Profile or choose an existing mobile gateway/peer profile and click Properties. The Mobile Gateway/Peer Profile (Create|Edit) form opens.

Configure the required parameters.

Select a python policy, if required.

If you want to specify non-default message-retransmit parameters, disable the Message-Retransmit - Default parameter and configure the Message-Retransmit - Timeout (seconds) and Message-Retransmit - Retries parameters.

If you want to specify non-default keep-alive parameters, disable the Keep-Alive - Default parameter and configure the Keep-Alive - Interval (seconds), Keep-Alive - Timeout (seconds), and Keep-Alive - Retries parameters.

On the Charging Characteristics panel, configure the rquired home charging characteristics and roaming charging characteristics.

Click on the PGW tab to configure packet data network gateway QoS parameters.

Configure the required parameters.

You must disable the Default check box for each parameter in order to configure the parameter.

Click on the GGSN tab to configure gateway GPRS support node QoS parameters.

Configure the required parameters.

You must disable the Default check box for each parameter in order to configure the parameter.

Click on the MME tab to configure gateway MME node parameters.

Configure QoS, Dowlink, Uplink, and AMBR parameters as required.

Click OK to save the profile and close the form, or click Apply to save the profile. See To release and distribute a policy to distribute the profile to NEs.

End of steps