To show a routing policy CLI configuration in the client GUI
General Information
To perform this procedure, you must use a routing policy that has been released and distributed to one or more NEs; see To release and distribute a policy . You must also ensure that the mediation security policy associated with the NE is configured to allow CLI access; see To configure device mediation .
Steps
1 |
Choose Policies→Routing→Policy type in the NFM-P main menu where Policy Type is the type of policy that you want to view. The appropriate policy manager form opens. |
2 |
Click Search and choose the required policy, then click Properties. The appropriate Routing Policy form opens. |
3 |
Click on the Local Definitions tab. A list of NEs is displayed to which the policy was distributed. |
4 |
Choose a site and click Properties. The Routing Policy_type, Local Policy form opens. |
5 |
Click Show Policy. A Routing Policy Show Policy window opens and the NFM-P executes a “show router policy type” command on the NE. The Routing Policy Show Policy window displays the command output. |
6 |
View the policy. |
7 |
Close all open forms as required. End of steps |