To configure a GNE site on a VLL service

Purpose

Use this procedure to add a GNE site and GNE service interfaces to an existing VLL service. This procedure applies to VLL Epipe, Apipe, Fpipe, Ipipe, and Cpipe services. This procedure also applies to Wavence VLL Epipe, Apipe, and Cpipe services.

Steps
 

Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.


Select a VLL service and click Properties. The VLL_type Service (Edit) form opens.


On the component tree, right-click on VLL_type Service and choose Create GNE Site. The Select Network Elements - VLL_type Service form opens with a list of available NEs.


Choose a site and click OK. The GNE Site (Create) form opens.


Configure the required parameters.


Click Apply.


To configure an interface for the GNE site:

  1. Click on the GNE Service Interfaces tab and then Click Create. The GNE Service Interface (Create) form opens.

  2. Configure the parameters.
    • Name

    • Description

    • Type

  3. Click on the Ports tab and then click Select beside the Interface Index field. The Select Generic NE Interface form appears.

  4. Select an interface from the list and click OK. The GNE Service Interface (Create) form reappears with the interface information displayed.

  5. Configure the parameters.
    • Encapsulation Type

    • Outer Encapsulation Value

    • Inner Encapsulation Value

  6. Click OK. The GNE Site (Create) form reappears with the interface information displayed in the service component tree.


Save the changes and close the forms.

End of steps