Sample VLL service configuration

Sample VLL service

The following figure shows a sample VLL service.

Figure 76-8: Sample VLL service
Sample VLL service
Configuration steps

Assuming the core IP/MPLS network and service tunnels have already been configured, the following high-level tasks are required to configure this sample VLL service.

 

Configure policies as required, for example, access ingress and egress interface, ATM, Scheduler, ACL IP and ACL MAC, Accounting, and ANCP policies.


Configure ports as access ports for use in the service, if applicable.


Configure service tunnels as required.


Create and configure Subscriber 1.


Create and configure Service 1.