To configure microwave compression on an MW link SAP on a VLL L2 access interface

Note: You can configure microwave compression only on an MW link SAP associated with a 7705 SAR-8 or 7705 SAR-18.

Microwave compression cannot be configured on an MW link SAP when the Outer Encapsulation Value parameter of the port in Step 6 of To create a VLL L2 access interface on a terminating site is set to 0 or 1.

See To configure a 7705 SAR MW link and To configure a 7705 SAR MW link member for more information about configuring a 7705 SAR MW link and MW link member.

Steps
 

Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.


Choose a VLL and click Properties. The VLL_type Service (Edit) form opens.


On the navigation tree, expand Site→L2 Access Interfaces, right-click on the L2 access interface and choose Properties. The VLL L2 Access Interface (Edit) form opens.


Click on the Microwave tab.


Enable the Compression parameter.


Configure the required parameters.


Save the changes and close the forms.

End of steps