To modify a VLL service

CAUTION 

CAUTION

Service Disruption

Modifying parameters can be service-affecting.

Steps
 
1 

Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.

2 

Configure the filter criteria. A list of services appears.

3 

Choose a VLL service and click Properties. The VLL_type Service (Edit) form opens.

The following tabs list the service elements that can be individually or collectively selected and configured.

Some service elements do not apply to all VLL services.

  • Bandwidth tab — displays service tunnel bandwidth booking information for the service.

  • Sites tab — lists the sites that are included in the service

  • Endpoints tab — lists the service endpoints

  • Interface tab — lists the access interfaces that are included in the service

  • Spoke SDP Bindings tab — displays the spoke SDP bindings that are associated with the service

  • VLAN Path Instance - list VLAN path instances associated with a Wavence service

  • OAM tab

  • Faults tab — displays the faults associated with the service

  • Schedulers tab — configures the rate type and displays the egress aggregate rate limit

4 

Modify the parameters for the service as required.

To configure items on the tabs that contain lists of service elements, select the items and click Properties.

5 

Click OK. A dialog box appears.

6 

Click Yes to confirm the action. The VLL_type Service (Edit) form closes and the Manage Services form reappears.

7 

Close the Manage Services form.

End of steps