To configure MVR for MLD on a VPLS site

Steps
 
1 

Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.

2 

Configure the filter criteria and click Search. A list of services appears.

3 

Choose a VPLS and click Properties. The VPLS Service (Edit) form opens.

4 

On the service tree, expand the site on which you want to configure MVR for MLD and click Properties. The VPLS Site (Edit) form opens.

5 

Click on the Multicast tab.

6 

Click on the MVR (MLD) tab.

7 

Configure the required parameters.

The Administrative State parameter specifies whether the site is an MVR VPLS site.

The Routing Policy Name parameter is configurable when the Use Component Package Policy is disabled.

After a multicast package policy is applied to an MVPLS, the policy is distributed as the routing policy to all MVR-capable MVPLS sites. If you apply another package policy to the site, the new policy is distributed to the site and the previously distributed policy remains on the site.

8 

If you deselect the Use Component Package Policy parameter, you must specify a multicast package policy to associate with the MVR VPLS site. Perform one of the following.

  1. Select a multicast package policy.

  2. Manually enter a multicast package policy name as the Routing Policy Name parameter value.

9 

Click on the User MVR SAPs tab to view the VPLS SAPs that use the MVR VPLS site and click Search to list the VPLS SAPs.

10 

Save the changes and close the forms.

End of steps