To configure residential subscriber management for the VPLS L2 access interface
Steps
1 |
Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens. |
2 |
Choose a VPLS and click Properties. The VPLS Service (Edit) form opens. |
3 |
On the service tree, expand Sites→site→L2 Access Interfaces. |
4 |
Right-click the L2 access interface and choose Properties. The VPLS L2 Access Interface (Edit) form opens. |
5 |
Click on the Subscriber Management tab. |
6 |
Enable the SHCV Enabled parameter to enable SHCV. Otherwise, go to Step 8 . |
7 |
Configure the required parameters. |
8 |
Click on the IGMP Host Tracking tab. |
9 |
Select the import policy used to filter IGMP packets. |
10 |
Configure the required parameters. |
11 |
Click on the Profiles tab and configure the required parameters. |
12 |
Select a default subscriber profile for the interface in the Default Subscriber Profile panel. |
13 |
Select a default SLA profile for the SAP in the Default SLA Profile panel. |
14 |
Select a subscriber identification policy for the SAP in the Subscriber Identification Policy panel. |
15 |
Select a default application profile for the SAP in the Default Application Profile panel. |
16 |
Select a non-subscriber subscriber profile for the SAP in the Non-Subscriber Traffic Subscriber Profile panel. |
17 |
Select a non-subscriber traffic SLA profile for the SAP in the Non-Subscriber Traffic SLA Profile panel. |
18 |
Select a non-subscriber traffic application profile for the SAP in the Non-Subscriber Traffic Application Profile panel. |
19 |
Click on the Host Tracking Info tab to view a list of hosts that are being tracked on this L2 access interface. |
20 |
Save the changes and close the forms. End of steps |