To configure IGMP snooping for a VPLS L2 access interface

Steps
 

Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.


Choose a VPLS and click Properties. The VPLS Service (Edit) form opens.


On the service tree, expand Sites→site→L2 Access Interfaces.


Right-click the L2 access interface and choose Properties. The VPLS L2 Access Interface (Edit) form opens.


Click on the IGMP Snooping tab.


Configure the required parameters.

The General Query Interval (seconds), Maximum Response Interval (seconds), Robust count, and IGMP Version parameters are configurable when the Send Queries parameter is enabled.


To configure a multicast CAC policy, select a policy in the Multicast CAC Policy panel.


Configure the required parameters.


Click on the Static Mcast Group tab to configure a static multicast group.


10 

Click Create. The Access Interface Igmp Snooping Mcast Group Display (Create) form opens.


11 

Configure the required parameters.


12 

Close the form.


13 

Save the changes and close the form.


14 

To configure the LAG port down parameters:

  1. Click on the LAG Port Down tab.

  2. Click Create. The LAG Port Down (Create) form opens.

  3. Configure the required parameters.

  4. Click on the Levels tab and click Create. The Multicast CAC Level (Create) form opens.

  5. Configure the required parameters.

  6. Save the changes and close the form.


15 

Save the changes and close the forms.

End of steps