To specify an LI MAC filter entry as an LI source

Steps

Specifying an LI MAC filter entry as the mirror source causes all the packets matching the filter to be mirrored to the mirror destination specified by the service ID of the mirror source.

 
1 

Choose Manage→Service→Mirror Services from the NFM-P main menu. The Manage Mirror Services form opens.

2 

Select a mirror service and click Properties. The Mirror Service (Edit) form opens.

3 

Perform one of the following:

  1. To specify an LI source LI IP filter entry on a destination site, expand the Destination Site object to view the configured destination sites, and expand the destination site object on which you are specifying the LI source LI IP filter entry.

  2. To specify an LI source LI IP filter entry on a source site, expand the Source Site object to view the configured source sites, and expand the source site object on which you are specifying the LI source LI IP filter entry.

4 

Right-click on LI Source LI IP Filters and choose Create LI Source LI IP Filter. The LI Source LI IP Filter (Create) form opens.

Note: A mirror site can be configured with debug or LI sources, but not both. LI source configuration takes priority over debug source configuration.

5 

Select an LI source LI IP filter entry.

6 

Configure the required parameters.

7 

Save the changes and close the forms.

End of steps