To specify a source subscriber as a mirror source

Steps
 

Choose Manage→Service→Mirror Services from the NFM-P main menu. The Manage Mirror Services form opens.


Select a mirror service and click Properties. The Mirror Service (Edit) form opens.


In the service navigation tree, expand Source Sites→source_sites, right-click on Source Subscribers and choose Create Source Subscriber. The Source Subscriber (Create) form opens.


Configure the required parameters.


You can further restrict the mirrored subscriber host traffic associated with the subscriber identification string by specifying SAP or SLA-profile criteria. To specify an SLA profile as a match criterion, go to Step 7 .

Note: You can configure parameters in the SAP/Subscriber Host Match Criteria panel or the SLA Profile Match Criteria panel, but you cannot configure parameters in both panels.


Specify a SAP on which to mirror subscriber host traffic.

Note: The form lists only dot1q- or QinQ-encapsulated SAPs that have subscriber management enabled.

Perform the following

  1. Select a SAP in the SAP/Subscriber Host Match Criteria panel.

  2. Configure the parameters in the SAP/Subscriber Host Match Criteria panel to specify the subscriber host match criteria for the SAP.

    Note:

    The NFM-P does not accept the parameter values unless a SAP is specified.


To specify an SLA profile as a match criterion, select an SLA profile in the SLA Profile Match Criteria panel.


Save the changes and close the forms.

End of steps