To configure an MPLS-TP static pseudowire on a mirror SDP binding
Steps
Perform this procedure to create an MPLS-TP static pseudowire on the mirror SDP binding. An MPLS-TP service tunnel must be used in the mirror SDP binding, and the Control Word parameter for pseudowire OAM must be set to Preferred in Step 11 of To create a source site on a mirror service .
1 |
Choose Manage→Service→Mirror Services from the NFM-P main menu. The Manage Mirror Services form opens. |
2 |
Select a mirror service and click Properties. The Mirror Service (Edit) form opens. |
3 |
On the navigation tree, expand the source site on which you want to configure the mirror SDP binding, expand Mirror SDP Bindings and click on the mirror SDP binding on which you want to configure the static MPLS-TP pseudowire. The Mirror SDP Binding (Edit) form opens. |
4 |
Click on the Control Channel tab. |
5 |
Configure the required parameters. |
6 |
Click on the Static PW tab and click Create. The PW Path ID (Create) form opens. |
7 |
Configure the Path AGI parameter. |
8 |
Configure the parameters in the Source Attachment Individual Identifier panel. |
9 |
Configure the parameters in the Target Attachment Individual Identifier panel. |
10 |
Save the changes and close the forms. End of steps |