To configure an ATM OAM loopback from a device Properties form
Steps
The ATM OAM loopback settings are configured globally on supported devices. However, a loopback must be enabled on an IES or VPRN SAP.
1 |
Choose Equipment from the navigation tree view selector. The navigation tree displays the Equipment view. |
2 |
Right-click on the device where you want to configure an ATM OAM loopback and select Properties. The Network Element (Edit) form opens. |
3 |
Click on the ATM tab. |
4 |
Configure the required parameters. |
5 |
Save your changes and close the form. End of steps |