To restore a service after a throughput configuration

Service restoration considerations

The NFM-P performs the following when you restore the service:

  • deletes the newly created SAPs

  • re-creates the original SAPs

  • on the loopback port: resets the loopback type to none if it was changed by the throughput configuration, and changes the loopback parameters to their default values

  • updates the site throughput status information

  • updates the service throughput status information

Steps
 

Perform one of the following:

  1. Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.

  2. Choose Manage→Service→Composite Services from the NFM-P main menu. The Manage Services form opens.


Choose the service for which you need to restore the configuration and click Properties. The Service_type Service (Edit) form opens.


Click on the Throughput Configuration tab. A list of throughput configurations on the service appears.


Select the throughput configuration you need to remove, and click Delete.

Note: Alternatively, you can select a service or composite service that is modified for throughput configuration from the Manage Services form or Manage Composite Services, click on the Throughput Configuration button, and choose Delete (all) from the contextual menu. This removes all the service throughput configurations on the service.


Close the forms.

End of steps