To create a routed VPLS connector
Steps
1 |
Choose Manage→Service→Composite Services from the NFM-P main menu. The Manage Composite Services form opens. |
2 |
Select a composite service and click Properties. The Composite Service (Edit) form opens. |
3 |
In the service navigation tree, right-click on Connectors and choose Create RoutedVplsConnector. The RoutedVplsConnector (Create) form opens. |
4 |
Configure the required general parameters. |
5 |
Select an SC to associate with the connector in the Service A panel. |
6 |
Select an SC to associate with the connector in the Service B panel. |
7 |
Select a site from service A to associate with the connector in the Site A panel. |
8 |
Select a site from service B to associate with the connector in the Site B panel. Note: The sites that you select in Step 7 and Step 8 must be located on the same NE. |
9 |
Click on the Routed-VPLS L3 Connection Point tab. |
10 |
Select an L3 access interface. |
11 |
Save the changes and close the forms. End of steps |