To configure a PIM interface on an IES group interface

Steps
 

Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.


Choose an IES and click Properties. The IES (Edit) form opens.


On the service tree, expand Sites→routing_instance→Subscriber Interfaces→subscriber_interface.


Right-click on a group interface. The IES Group Interface (Edit) form opens.


Click on the PIM Interfaces tab.


Click on the Add button. The PIM Interface (Create) form opens.


Configure the required parameters.


Click on the Behavior tab.

  1. Configure the required parameters.

  2. To change the IPv4 or IPv6 administrative state for the PIM interface, click on the IPv4 and IPv6 tabs and configure the Administrative State parameter, as required.


Click on the Multicast CAC tab to configure multicast CAC on the PIM interface.

  1. Select a multicast CAC policy.

  2. Configure the Unconstrained Bandwidth and Mandatory Bandwidth parameters.

  3. Click on the Levels tab.

  4. Click Create. The PIM Interface Multicast CAC level form opens.

  5. Configure the Level ID and Bandwidth parameters.

  6. Save your changes and close the form.

  7. Click on the LAG Port Down tab.

  8. Click Create. The PIM Interface Multicast CAC LAG Port Down form opens.

  9. Configure the Number of Ports Down and Level parameters.


10 

Save your changes and close the forms.

End of steps