To add a TMS interface to an IES

Purpose

The 7750 SR-7 and 7750 SR-12 devices support the configuration of a TMS interface in an IES.

The following conditions must be met before you can configure a TMS interface.

  • You must have one IES configured.The TMS interface is configured on this on-ramp IES.

  • You must have one VPRN configured for the off-ramp VPRN.

  • Optionally, you can have one VPRN configured for the management VPRN.

  • Each service must be associated within the same site on the same NE.

  • An XP-IOM-3 is required.

  • The ISA-TMS daughter card must be installed.

Steps
 
1 

Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.

2 

Choose an IES and click Properties. The IES Service Subscriber (Edit) form opens.

3 

On the service navigation tree, expand Sites→site, right-click on TMS Interfaces and choose Create TMS Interface. The TMS Interface (Create) form opens.

4 

Configure the required parameters.

The Name value for a TMS interface must be unique in the context of the IES Site. That is, there cannot be another L3 access interface, subscriber interface, group interface or TMS interface with the same name on the same IES site.

5 

To assign an off-ramp VPRN to the TMS interface, select a VPRN in the Off-Ramp VPRN panel.

6 

Set the off-ramp ingress routing context. Configure the Routing Instance parameter.

7 

To assign a management VPRN to the TMS interface, select a VPRN in the Management VPRN panel.

8 

To associate an ISA-TMS daughter card with the TMS interface, select an ISA-TMS in the TMS Info panel.

Note: An ISA-TMS card can only be assigned to one TMS interface.

9 

Configure the ISA-TMS Authentication parameter.

10 

To assign an IP address to the TMS interface:

  1. Click on the Addresses tab.

  2. Click Create. The IP Address (Create) form opens.

  3. Configure the required parameters.

  4. Save the changes and close the form.

11 

Save the changes and close the forms.

End of steps