To add an IGMP interface to an IES
Note: IGMP must be enabled on the NE routing instance before you can create an IGMP interface.
Steps
|
|
1 |
Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.
|
2 |
Choose an IES and click Properties. The IES Service (Edit) form opens.
|
3 |
On the service tree, expand the Sites icon and click on a site. The IES Site (Edit) form opens.
|
4 |
Click on the Multicast tab, then the Interfaces tab.
|
5 |
Click Add. The Create Interface form opens.
|
6 |
Set the What type of interface would you like to create? parameter to IGMP.
|
7 |
Click OK. The IGMP Interface (Create) form opens.
|
8 |
Select an interface and configure the parameters.
|
9 |
Click on the Behavior tab and configure the parameters.
|
10 |
To add a multicast CAC policy:
-
Click on the Multicast CAC tab.
-
Select a multicast CAC policy in the Multicast CAC Policy panel.
-
Configure the required parameters.
-
Click on the Levels tab and click Create. The Multicast CAC Level, IGMP Interface (Create) form opens.
-
Configure the parameters and close the form.
-
Click on the LAG Port Down tab and click Create. The LAG Port Down, IGMP Interface (Create) form opens.
-
Configure the parameters and close the form.
|
11 |
To configure SSM translation:
-
Click on the SSM Translation tab and click Create. The SSM Translation, IGMP Interface (Create) form opens.
-
Configure the required parameters and close the form.
|
12 |
To add a static multicast group or source:
-
Click on the Static Group/Source tab and click Create. The StaticGrpSrc, Interface ID - 6, Routing Instance (Create) form opens.
-
Configure the required parameters, save the changes and close the form.
|
13 |
Save the changes and close the form.
|
14 |
On the multicast tab, click on the IGMP Group Interfaces tab to identify an IGMP group interface for the IES service.
-
Click Create. The IGMP Group Interface - Routing Instance (Create) form opens.
-
Configure the required parameters.
-
Select an IGMP group interface in the IGMP Group Interface panel and configure the parameters.
-
Click on the Behavior tab. select an import policy and configure the required parameters.
-
Click on the Multicast CAC tab to add a multicast CAC policy.
-
Select a multicast CAC policy in the Multicast CAC Policy panel and configure the required parameters.
-
Close the form.
|
15 |
Close the forms.
End of steps |