To add an AA interface to an IES or a VPRN site
Steps
1 |
Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens. |
2 |
Choose the required IES or VPRN service and click Properties. The IES or VPRN Service (Edit) form opens. |
3 |
On the service navigation tree, expand Sites→Sites or Sites→Routing Instance, right-click on an AA Interface and choose Create IES or VPRN AA Interface. The IES/VPRN AA Interface (Create) form opens |
4 |
Configure the required parameters on the General tab. |
5 |
Click on the Port tab and click Select to choose a terminating port. |
6 |
Save the changes. The IES/VPRN AA Interface (Create) form refreshes with addition tabs. |
7 |
As required, click on the QoS tab to select an ingress policy or egress policy for the AA interface. |
8 |
As required, click on the ACL tab to select an ingress filter for the AA interface. |
9 |
Click on the Addresses tab and click Create. The IP Address, Service forms opens. |
10 |
Configure the required parameters. |
11 |
Save the changes and close the forms. End of steps |