To configure DHCPv6 on an IES L3 access interface

Steps
 

Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.


Choose an IES service and click Properties. The IES Service (Edit) form opens.


Expand the Site icon in the service navigation tree on which you need to configure the L3 access interface, right-click on the L3 Access Interface icon and choose Properties. The IES L3 Access Interface (Edit) form opens.


Ensure that the IPv6 Allowed parameter is enabled.


Click on the DHCPv6 tab and configure the required parameters on the DHCPv6 Relay — General tab.


Select a python policy, if required.


Select a local user database, if required.


Click on the Server tab.


Configure the Server 1 through Server 8 parameters.


10 

Configure the interface name for each DHCPv6 server that you configured in Step 9 by selecting the an interface in the Zone Index panel.


11 

Click on the DHCPv6-Prefix tab.


12 

Click Create. The DhcpRelayV6PrefixDelegation (Create) form opens.


13 

Configure the required parameters.


14 

Save the changes and close the forms.

End of steps