To modify an IES
|
CAUTION
Service Disruption |
Modifying parameters can be service-affecting.
Steps
|
|
1 |
Choose Manage→Service→Services from the NFM-P main menu. The Manage Services form opens.
|
2 |
Choose an IES and click Properties. The IES Service (Edit) form opens. The following tabs list the service elements that can be individually or collectively selected and configured:
-
General tab — displays general customer and service information
-
Sites tab — lists the sites that are included in the service
-
Interfaces tab — lists the interfaces, such as L3 access, that are included in the service, and allows the creation and configuration of subscriber, group, and redundant interfaces
-
SDP Bindings tab — displays the spoke SDP bindings that are associated with the service
-
Addresses tab — lists the IP addresses that are associated with the service
You cannot remove an IP address from an interface when the IP address of a static host is defined in the subnet of the interface IP address and the ARP Populate parameter is enabled on the Anti-Spoofing tab.
-
Faults tab — displays the faults associated with the service
|
3 |
Modify the parameters for the service, as required.
|
4 |
Save the changes and close the forms.
End of steps |