Workflow to configure network IP interface forwarding class-based redirection
Stages
The following workflow describes the steps required to configure a network IP interface forwarding class-based redirection.
1 |
Create a new global egress queue group template policy. See To configure a queue group egress template policy for more information. |
2 |
Distribute the global egress queue group template policy to the NEs. See To release and distribute a policy for more information. |
3 |
Create an egress queue group on the Ethernet network port. See To add a queue group to an Ethernet port for more information. |
4 |
Create or configure a global network policy with the forwarding class mapped to the queue group queue ID. The queue group queue ID must be included in the egress queue group template policy, which is specified when the network policy is applied to the IP interface. See To configure a QoS network policy for more information. |
5 |
Distribute the global network policy to the NEs. See To release and distribute a policy for more information. |
6 |
On the network interface configuration form, assign the network policy and the queue group template policy to the network interface. The network egress queue group must be created on the port to which the network interface is bound. The network egress queue group must use the same name as the selected queue group template policy. See To create an L3 network interface on a routing instance for more information. |