To configure L2Aware static port forwarding on a subscriber instance

Steps
 
1 

Choose Manage→Residential Subscribers from the NFM-P main menu. The Manage Residential Subscribers form opens.

2 

Choose Residential Subscriber Instance (Residential Subscriber) and click Search.

3 

Select a subscriber instance and click Properties. The Residential Subscriber Instance (Edit) form opens.

4 

Click on the NAT Static Port Forwarding tab.

  1. Click Create or select an existing static port forwarding entry and click Properties. The NAT Static Port Forwarding Display (Create|Edit) form opens.

  2. Configure the required parameters.

    You cannot specify the same set of Inside Port and Protocol values in more than one static port mapping to an Inside IP Address.

    You can specify the same Outside Port value in multiple mappings to an Inside IP Address.

  3. Save your changes and close the form.

5 

Perform the following steps to synchronize NAT static port forwards.

  1. Select one or more static port forward entries and click Sync. The NAT Static Port Forwarding Sync form opens. You can select up to 100 static port forward entries.

  2. Select a targeted router instance.

  3. Configure the Lifetime parameter.

6 

Save your changes and close the forms.

End of steps