To resynchronize static port forwarding entries

Purpose

Because of the potentially large number of static port forwarding entries, the entries are not resynchronized during a full NE resynchronization. Perform this procedure to manually resynchronize the entries.

Note: The NFM-P static port forwarding entries are current and do not require resynchronization if the following conditions are true.

Steps
 

Right-click on an NE in the Equipment navigation tree and choose Resync→Customized Resync. The Resync Sites wizard opens.


Select Choose MIB Entries.


Click Next. The Choose MIB Entries step is displayed.


Select tmnxNatFwd2Entry.


Click Next. The Force Resync step is displayed.


Select the Ignore Timestamps parameter.


Click Finish. The entries are refreshed.

You can view the static port forwarding entries on the NAT Static Port Forwarding tab of the NAT Configuration form for the following:

  • base or service routing instances

  • subscriber instances

End of steps